Monitoring the Reaction of the Body State to Antibiotic Treatment against Helicobacter pylori via Infrared Spectroscopy: A Case Study

The current understanding of deviations of human microbiota caused by antibiotic treatment is poor. In an attempt to improve it, a proof-of-principle spectroscopic study of the breath of one volunteer affected by a course of antibiotics for Helicobacter pylori eradication was performed. Fourier transform spectroscopy enabled searching for the absorption spectral structures sensitive to the treatment in the entire mid-infrared region. Two spectral ranges were found where the corresponding structures strongly correlated with the beginning and end of the treatment. The structures were identified as methyl ester of butyric acid and ethyl ester of pyruvic acid. Both acids generated by bacteria in the gut are involved in fundamental processes of human metabolism. Being confirmed by other studies, measurement of the methyl butyrate deviation could be a promising way for monitoring acute gastritis and anti-Helicobacter pylori antibiotic treatment.     

Earth-abundant Metal-catalyzed Reductive Amination: Recent Advances and Prospect for Future Catalysis

Nitrogen-containing compounds, as an important class of chemicals, have been used widely in pharmaceuticals, materials synthesis. Transition metal-catalyzed reductive amination of an aldehyde or a ketone with ammonia or an amine has been proved to be an efficient and practical method for the preparation of nitrogen-containing compounds in academia and industry for a century. Given the above, several effective methods using transition metals have been developed in recent years. Noble transition metals like Pd, Pt, and Au-based catalysts have been predominately used in reductive amination. Because of their high prices, strict official regulations of residues in pharmaceuticals, and deleterious effects on the biological system, their industrial applications are severely hampered. With the increasing sustainable and environmental problems, the Earth-abundant transition metals including Ti, Fe, Co, Ni, and Zr have also been investigated for the reductive amination reaction and showed great potential to the advancement of sustainable and cost-effective reductive amination processes. This critical review will mainly summarize the work using Earth-abundant metals. The effects of different transition metals used in catalytic reduction amination were discussed and compared, and some suggestions were given. The last section highlights the catalytic activities of bi- and tri-metallic catalysts. Indeed, this latter family is very promising and simultaneously benefits from increased stability, and selectivity, compared to monometallic NPs, due to synergistic substrate activation. Few comprehensive reviews focusing on Earth-abundant transition metals catalyst has been published since 1948, although several authors reported some summaries dealing with one or the other part of this aspect. It is hoped that this critical review will inspire researchers to develop new efficient and selective earth-abundant metal catalysts for highly, environmentally sustainable reductive amination methods, as well as improve the pharmaceutical industry and related chemical synthesis company traditional method with the utilization of the green method widely.     

Selective alcohol oxidation catalysed BY FeCl3 /novel glycine functionalised IONIC liquid

An effective and eco-friendly technique were designated for quick alcohol oxidation by glycine functionalised imidazolium ionic liquids in presence of FeCl₃ at ambient-temperature. No over the primary alcohols oxidation to carbonyl compounds was observed in presence of this FeCl₃/[Gmim]Cl. These benefits of the catalyst resulted mainly from the circumstance with alcohols-H₂O₂, and the Fe³⁺ was coordinated by the immobilized IL to permitted both reactants to access the active sites of the catalyst effectively. The catalyst recycled nine times without loss of activity.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

电催化醇选择性氧化为醛酮的研究进展

醇选择性氧化为相应的羰基化合物是有机化学中最常用的生成羰基化合物的反应,电催化氧化具有反应条件温和、环境友好等优点,是一种非常有前途的醇催化氧化绿色生产工艺。本文综述了直接和间接电催化氧化反应的方法,并对各类体系的催化效果进行了简要介绍。     

三价羰基硫离子(OCS3+)二体解离过程模拟研究

基于Gaussian量子化学模拟软件采用不同基组(6-31G^**和TZVP)下的B3LYP方法对基态三价羰基硫离子(OCS³⁺)的势能曲线进行分析,得到了三价羰基硫离子可能的解离通道.当固定C—O键长为OCS分子的构型键长时(2.1a.u.),通过模拟基态OCS³⁺离子沿着C—S键断裂的势能曲线,发现沿着C—S键的势能曲线是一个具有小势垒的排斥态;相反,当固定C—S键长为OCS分子的构型键长时(2.9a.u.),基态OCS³⁺离子沿着C—O键的势能曲线是一个势垒较大的排斥态,根据弗兰克-康登原理可知,基态OCS³⁺离子倾向于以断裂C—S键的方式进行解离.通过搜索基态OCS³⁺离子过渡态、IRC路径分析进一步确定了基态OCS³⁺离子具体的解离通道：OCS³⁺→CO⁺+S²⁺.最后通过对反应物和产物的Mulliken电荷分布和键长的分析,得到与前面一致的结论.     

N-月桂酰基甲基丙氨酸钠三元复配体系的协同效应北大核心CSCD

将N‑月桂酰基甲基丙氨酸钠(SLMA)依次与月桂酰胺丙基甜菜碱(LAB)、烷基糖苷(APG1214)分别进行二元及三元复配,通过吊片法、稳态荧光探针法、动态光散射及稳态荧光猝灭法,对SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系间的协同增效作用,以及溶液组成对其微极性、平均流体力学半径及胶束聚集数的影响进行了研究,并应用正规溶液理论计算二元及三元复配体系的相互作用参数。结果表明,SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系均表现出全面增效的协同作用,其最佳物质的量比分别为n(SLMA)∶n(LAB)=3∶7,n(SLMA/LAB)∶n(APG1214)=3∶7,对应临界胶束浓度(CMC)分别为1.054×10^(−3)和1.595×10^(−4) mol/L,SLMA/LAB二元复配体系趋于形成分布集中的单一形态聚集体,且总体偏小;SLMA/LAB/APG三元复配体系的胶束大小比单一体系分布宽,且其胶束体积明显大于二元复配体系。两种复配体系所形成的胶束聚集数均小于单一体系,形成了更加紧密、稳定、较小的胶束结构。SLMA/LAB二元复配体系及SLMA/LAB/APG三元复配体系中表面活性剂分子间的相互作用力加快了稳定胶束的形成,胶束大小分布较宽,以球状及非球状胶束的形式存在,且复配体系形成了更加紧密的胶束结构。     

几种酰胺类化合物作为添加剂对钢—钢和钢—铝摩擦副摩擦学性能的影响

采用四球摩擦磨损试验机和SRV摩擦磨损试验机考察了 4种酰胺化合物对钢 -钢和钢 -铝摩擦副摩擦磨损性能的影响 ,用X射线光电子能谱 (XPS)分析了丙烯酰胺润滑下铝合金磨斑表面元素的化学状态 .结果表明 :对钢 -钢摩擦副 ,酰胺类化合物表现出一定的抗磨减摩作用 ,对钢 -铝摩擦副 ,丙烯酰胺和乙酰胺表现出良好的抗磨减摩性能 .XPS分析结果显示 ,铝合金磨斑表面存在 3种价态的氮的化合物及 2种价态的铝 ,表明其磨损表面生成了复杂的反应膜     

多层金属爆炸焊接复板飞行姿态的计算方法

在两层金属爆炸焊接复板飞行姿态的理论计算基础上，运用质量守恒、动量守恒定理和契特公式推导了多层金属爆炸接复板飞行姿态的理论计算模型，经过实验验证，该计算模型和实验相符合，对于多层金属爆炸焊接工艺参数的设计具有很高的使用价值。     

碳纳米管-聚丙烯酸乙酯复合乳液的制备及其润滑性能研究

采用乳液聚合方法合成了碳纳米管一聚丙烯酸乙酯(CNTs—PEA)复合乳液;采用JEM100XI型透射电子显微镜(TEM)观察了复合乳液的微观形貌;采用MQ-800型四球摩擦磨损试验机和MM-200型环一块摩擦磨损试验机考察了CNTs—PEA复合乳液作为水基润滑添加剂的摩擦学性能;并采用JSM-35型扫描电子显微镜(SEM)分析了磨斑表面．结果表明,CNTs—PEA复合乳液在极低浓度下即可有效地提高水基液的承载能力和抗磨性能．